Code: C6010
Description: Heat roller heating time-out 2 • The temperature on the heat toller does not reach the correct temperature within the predetermined period after self-diagnostic code 6000 is cleared. The period for detection is longer than the condition for self-diagnostics code 6000.
Causes: Defective engine controller PCB. Defective upper fuser heater. Defective upper thermostat. Defective fuser PCB. Defective upper fuser thermistor, or fitting is not proper. Defective AC power source. (Abnormal low voltage) Defective harness between engine controller PCB and fuser unit, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the fuser unit (upper fuser heater). Replace the fuser unit (upper thermostat). Replace the fuser unit (fuser PCB). Replace the fuser unit (upper fuser thermistor). Connect to the proper AC power source. Check the continuity of the harness and the insertion of connectors.