Code: C6100
Description: Press/heat roller heating time-out 1 • The temperature on the press/heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PCB has turned on the lower heater lamp. This is detected when the lower heater lamp is turned on.
Causes: Defective engine controller PCB. Defective lower fuser heater. Defective lower thermostat. Defective fuser PCB. Defective lower fuser thermistor, or fitting is not proper. Defective power supply unit. Defective harness between engine controller PCB and fuser unit, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the fuser unit (lower fuser heater). Replace the fuser unit (lower thermostat). Replace the fuser unit (fuser PCB). Replace the fuser unit (lower fuser thermistor). Replace the power supply unit. Check the continuity of the harness and the insertion of connectors.