Code: C7101
Description: Black T/C sensor toner density detection error • A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PCB.
Causes: Defective engine controller PCB. Defective black developer (black developer PCB or black T/C sensor). Defective black developer (black toner feed motor does not rotate in the correct revolution) . Defective harness between engine controller PCB and black developer, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the black developer. Replace the black developer. Check the continuity of the harness and the insertion of connectors.