Code: C7103
Description: Magenta T/C sensor toner density detection error • A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PCB.
Causes: Defective engine controller PCB. Defective magenta developer (magenta developer PCB or magenta T/C sensor). Defective magenta developer (magenta toner feed motor does not rotate in the correct revolution) . Defective harness between engine controller PCB and magenta developer, or poor contact of the connector terminals
Remedy: Replace the engine controller PCB and check for correct operation. Replace the magenta developer. Replace the magenta developer. Check the continuity of the harness and the insertion of connectors.