Code: C0440
Description: Document finisher communication problem • The microcomputer of scanner main PCB does not commnunicate to the document Document finisher. No communication: there is no reply after 3 retries. Abnormal communication: a communication error (parity or checksum error) is detected five times in succession.
Causes: Poor contact in the connector terminals. Defective scanner main PCB. Defective finisher main PCB.
Remedy: Check the connection of connectors CN42 on the scanner main PCB and CN2 on the finisher main PCB, and the continuity across the connector terminals. Repair or replace if necessary. Replace the scanner main PCB and check for correct operation. Replace the finisher main PCB and check for correct operation.