Code: C2000
Description: Main drive motor lock • The frequency generation pulse which the main drive motor generates to CPU (U2) on the engine controller PCB in normal operation (after selfdiagnostics codes 2010 and 2020 are cleared) is not at the correct frequency.
Causes: Defective main drive motor. Excessive torque for driving drum unit or primary transfer unit. (Overloaded by a damaged gear.) Defective harness between engine controller PCB and main drive motor, or poor contact of the connector terminals. Defective engine controller PCB.
Remedy: Replace the main drive motor. Check if the drum unit or primary transfer unit rotates smoothly. Check for broken gears. Replace if any. Check the continuity of the harness and the insertion of connectors. Replace the engine controller PCB and check for correct operation.