Code: C2101
Description: Black developer drive motor lock • The FG (Frequency generation) pulse which the black developer drive motor generates is not entered at the correct frequency in CPU (U2) on the engine controller PCB during normal operation (after self-diagnostics codes 2111 and 2121 are cleared).
Causes: Defective engine controller PCB. Defective black developer drive motor. Excessive torque for driving black developer. (Overloaded by a damaged gear.) Defective harness between engine controller PCB and black developer drive motor, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the black developer drive motor. Check if the black developer rotates smoothly. Check for broken gears. Replace if any. Check the continuity of the harness and the insertion of connectors.