Code: C3100
Description: Scanner carriage problem • The home position is not correct when the power is turned on or at the start of copying using the bypass table.
Causes: Defective scanner main PCB. Defective scanner home position switch. Defective scanner motor. Poor contact in the connector terminals. Defective mirror flame, exposure lamp or scanner wire.
Remedy: Replace the scanner main PCB and check for correct operation. Replace the scanner home position switch. Replace the scanner motor. Check the connection of connector CN40 on the scanner main PCB and the continuity across the connector terminals. Repair or replace if necessary. Check if the mirror flames and exposure lamp are on the rail. And check the scanner wire winds correctly.