Code: C7102
Description: Cyan T/C sensor toner density detection error • A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PCB.
Causes: Defective engine controller PCB. Defective cyan developer (cyan developer PCB or cyan T/C sensor). Defective cyan developer (cyan toner feed motor does not rotate in the correct revolution) . Defective harness between engine controller PCB and cyan developer, or poor contact of the connector terminals.
Remedy: Replace the engine controller PCB and check for correct operation. Replace the cyan developer. Replace the cyan developer. Check the continuity of the harness and the insertion of connectors.