Code: C2000
Description: Drive motor problem
A stable state does not continue for 1 s from 1 s after the drive motor is activated.
A stable state does not continue for 1 s from 1 s after the drive motor is activated.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective main/ engine PWB.
Defective drive motor.
Defective drive transmission system.
Defective main/ engine PWB.
Defective drive motor.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the main/engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main/ engine PWB. Replace the main/engine PWB and check for correct operation.
Defective drive motor. Replace the drive motor.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main/ engine PWB. Replace the main/engine PWB and check for correct operation.
Defective drive motor. Replace the drive motor.