Code: C3200
Description: Exposure lamp problem
Non-lighting of the exposure lamp is detected at the beginning of copying.
Non-lighting of the exposure lamp is detected at the beginning of copying.
Causes: Poor contact in the connector terminals.
Defective exposure lamp.
Incorrect shading position.
Defective PWB
Defective exposure lamp.
Incorrect shading position.
Defective PWB
Remedy: Poor contact in the connector terminals. Check the connection of connector YC16 on the main/engine PWB and the connector on the inverter PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective exposure lamp. Replace the exposure lamp.
Incorrect shading position. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the home position switch.
Defective PWB. Replace the main/engine PWB or inverter PWB and check for correct operation.
Defective exposure lamp. Replace the exposure lamp.
Incorrect shading position. Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the home position switch.
Defective PWB. Replace the main/engine PWB or inverter PWB and check for correct operation.