Code: 3210
Description: CIS lamp error
When a lamp is made both to turn on, the white standard data at the time of an initial is lower than a rated value
When a lamp is made both to turn on, the white standard data at the time of an initial is lower than a rated value
Causes: CIS. Main/Engine PWB.
Remedy: CIS 1. Execute U906 Separating Operation Release. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CIS and main/engine PWB (YC2011) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the CIS and execute U411.
Main/Engine PWB Replace the main/engine PWB and check for correct operation.
Main/Engine PWB Replace the main/engine PWB and check for correct operation.