Code: C3300
Description: AGC problem
After AGC, correct input is not obtained at CCD.
After AGC, correct input is not obtained at CCD.
Causes: Poor contact in the connector terminals.
Defective exposure lamp
Defective PWB.
Defective exposure lamp
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC5 on the main PWB and the connector on the CCD PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective exposure lamp. Replace the exposure lamp.
Defective PWB. Replace the main PWB or CCD PWB and check for correct operation.
Defective exposure lamp. Replace the exposure lamp.
Defective PWB. Replace the main PWB or CCD PWB and check for correct operation.