Code: C3300
Description: AGC problem
After AGC, correct input is not obtained at CCD
After AGC, correct input is not obtained at CCD
Causes: Poor contact in the connector terminals
Defective exposure lamp.
Defective PWB
Defective exposure lamp.
Defective PWB
Remedy: Poor contact in the connector terminals. Check the connection of connector YC27 on the main/engine PWB and the connector on the CCD PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective exposure lamp. Replace the exposure lamp.
Defective PWB. Replace the main/engine PWB or CCD PWB and check for correct operation.
Defective exposure lamp. Replace the exposure lamp.
Defective PWB. Replace the main/engine PWB or CCD PWB and check for correct operation.