Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2810 — Kyocera TASKalfa 250ci

Code: C2810

Description: Waste toner motor error
After driving of the waste toner motor starts, the error signal is not at the H level for 2 s continuously.
Causes: Poor contact in the connector terminals
Defective drive transmission system.
Defective waste toner motor.
Defective engine PWB
Remedy: Poor contact in the connector terminals. Check the connection of connector YC12 on the engine PWB and the connector of the waste toner motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective waste toner motor. Replace the waste toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 250ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie