Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6000 — Kyocera TASKalfa 250ci

Code: C6000

Description: Fuser heater 1 break Fuser thermistor 1 detects a temperature lower than the Ready indication temperature for 90 s during warming up. Fuser thermistor 1 deduced less than 130 C/266F for 5 s during stand-by. Fuser thermistor 1 does not reach 75C/ 167F even after 30 s during warming up.
Causes: Defective fuser heater 1.
Defective fuser thermostat 1.
Installation defectiveness on fuser thermistor 1.
Defective PWB.
Remedy: Defective fuser heater 1. Check for continuity across each heater. If none, replace the fuser unit.
Defective fuser thermostat 1. Check for continuity across thermostat. If none, remove the cause and replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 250ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie