Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C6400 — Kyocera TASKalfa 250ci

Code: C6400

Description: Zero-cross signal error
While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s.
Causes: Poor contact in the connector terminals.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC4 on the engine PWB and the connector YC10 on the power souce PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective PWB. Replace the engine PWB or power source PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 250ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie