Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 1010 — Kyocera TASKalfa 2551ci

Code: 1010

Description: Lift motor 1 error
After cassette 1 is inserted, the lift sensor 1 does not turn on within 15 s. This error is detected five times successively.
Causes: Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the lift motor. Defective lift motor. Defective PWB.
Remedy: Defective bottom plate elevation mechanism in the cassette. Check to see if the bottom plate can move smoothly and repair any problem that is found.
Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity of the connector cable. If necessary, replace the cable. Lift motor 1 and engine connect PWB (YC6) Engine connect PWB (YC2) and engine PWB (YC4)
Defective drive transmission system of the lift motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if necessary.
Defective lift motor. Replace the lift motor 1.
Defective PWB. Replace the engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 2551ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie