Code: 2101
Description: Developer motor K steadystate error
The rated speed signal detected the stability OFF continuously for 1 s after the developer motor K stabilizes.
The rated speed signal detected the stability OFF continuously for 1 s after the developer motor K stabilizes.
Causes: Defective connector cable or poor contact in the connector. Defective drive transmission system. Defective motor. Defective PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity of the connector cable. If necessary, replace the cable. Developer motor K and engine PWB (YC17)
Defective drive transmission system. 1. To check the motor operation, execute DLP(K) by U030. 2. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if necessary.
Defective motor. Replace the Developer motor K.
Defective PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB and check for correct operation.
Defective drive transmission system. 1. To check the motor operation, execute DLP(K) by U030. 2. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if necessary.
Defective motor. Replace the Developer motor K.
Defective PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB and check for correct operation.