Code: 2102
Description: Developer motor YCM steady-state error
The rated speed signal detected the stability OFF continuously for 1 s after the developer motor YCM stabilizes.
The rated speed signal detected the stability OFF continuously for 1 s after the developer motor YCM stabilizes.
Causes: Defective connector cable or poor contact in the connector. Defective drive transmission system.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer motor YCM and engine PWB (YC16)
Defective drive transmission system. 1. To check the motor operation, execute DLP(YCM) by U030. 2. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective motor. Replace the Developer motor YCM.
Defective PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB and check for correct operation.
Defective drive transmission system. 1. To check the motor operation, execute DLP(YCM) by U030. 2. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective motor. Replace the Developer motor YCM.
Defective PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB and check for correct operation.