Code: 6050
Description: Abnormally low fuser thermistor 2 (center) temperature
The fuser temperature lower than 100 °C/212 °F is detected continuously for 1 s during printing.
The fuser temperature lower than 100 °C/212 °F is detected continuously for 1 s during printing.
Causes: Deformed connector pin. Defective fuser thermistor. Defective fuser heater. Defective PWB.
Remedy: Deformed connector pin. If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Defective fuser heater. Defective fuser thermistor. Replace the fuser unit.
Defective PWB. Replace the engine PWB and check for correct operation.
Defective fuser heater. Defective fuser thermistor. Replace the fuser unit.
Defective PWB. Replace the engine PWB and check for correct operation.