Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6250 — Kyocera TASKalfa 2551ci

Code: 6250

Description: Abnormally low fuser thermistor 1 (edge) temperature
The fuser temperature lower than 80 °C/176 °F is detected continuously for 1 s during printing.
Causes: Deformed connector pin. Defective fuser thermistor. Defective fuser heater. Defective PWB.
Remedy: Deformed connector pin. If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Defective fuser heater. Defective fuser thermistor. Replace the fuser unit.
Defective PWB. Replace the IH PWB or the engine PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 2551ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie