Code: 8230
Description: DF staple motor error 1
Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.)
Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.)
Causes: DF staple motor. DF staple sensor. DF main PWB
Remedy: DF staple motor 1. Remove the staple unit and check that stapling is possible without a jam. 2. Confirm that the FCC wiring connector is not distorted and connect the FCC wiring all the way in. Staple unit and DF main PWB (YC11) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the staple unit. (Refer to the service manual for the document finisher).
DF staple sensor Replace the staple unit.
DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher).
DF staple sensor Replace the staple unit.
DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher).