Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 8990 — Kyocera TASKalfa 2551ci

Code: 8990

Description: Backup memory data problem (document finisher)
When one of the existence of a finisher or a bridge is not detected.
Causes: Defective connector cable or poor contact in the connector. Defective power cord. EEPROM installed incorrectly. Defective finisher main PWB.
Remedy: Defective connector cable or poor contact in the connector. Check the connection of connector on the finisher main PWB and the connector of the machine, and the continuity across the connector terminals. Repair or replace if necessary.
Defective power cord Confirm that the power cable is firmly connected and, if necessary, connect the plug all the way in. Also check for continuity within the power cable. If none, replace the powercable.
EEPROM installed incorrectly. Install EEPROM correctly.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 2551ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie