Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 3200 — Kyocera TASKalfa 265ci

Code: 3200

Description: Exposure lamp error
The exposure lamp does not turn on when power is on. The lamp’s lumosity does not stabilize in one minute after power is on.
Causes: Defective connector cable or poor contact in the connector. Defective LED PWB. Defective LED driving PWB or CCD PWB. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. LED PWB and LED driving PWB (YC2) LED driving PWB (YC1) and CCD PWB (YC3) CCD PWB (YC1) and main PWB (YC8)
Defective LED PWB. Replace the scanner unit.
Defective LED driving PWB or CCD PWB. Replace the scanner unit.
Defective main PWB. Replace the main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 265ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie