Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2102 — Kyocera TASKalfa 300ci

Code: C2102

Description: Developing motor MCY error
The rated speed achievement signal does not turn to L within 2 s since developing motor MCY is activated. The rated speed achievement signal is at the H level for 1 s continuously after developing motor MCY is stabilized.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective developing motor MCY.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC16 on the engine PWB and the connector of the developing motor MCY, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective developing motor MCY. Run maintenance item U030 and check if the developing motor MCY operates when YC16-A4 (remote signal) on the engine PWB goes low. If not, replace the developing motor MCY.
Defective engine PWB. Run maintenance item U030 and check if YC16-A4 (remote signal) on the engine PWB goes low. If not, replace the engine PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 300ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie