Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C2352 — Kyocera TASKalfa 300ci

Code: C2352

Description: Cleaning motor MCY error
After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective cleaning motor K.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC16 on the engine PWB and the connector of the cleaning motor MCY, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective cleaning motor K. Run maintenance item U030 and check if the cleaning motor MCY operates when YC16-A13 (remote signal) on the engine PWB goes low. If not, replace the cleaning motor MCY.
Defective engine PWB. Run maintenance item U030 and check if YC16-A13 (remote signal) on the engine PWB goes low. If not, replace the engine PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 300ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie