Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8210 — Kyocera TASKalfa 300ci

Code: C8210

Description: Stapler moving motor 1 error (optional 3000-sheet document finisher) When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 1.5 s passed.
Stapler problem (optional document finisher) Jam 82 is indicated.
Causes: Poor contact in the connector terminals.
Defective stapler moving motor 1.
Defective finisher main PWB.
The stapler connector makes poor contact.
The stapler is blocked with a staple.
The stapler is broken.
Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC9 on the finisher main PWB and the connector of stapler moving motor 1, and the continuity across the connector terminals. Repair or replace if necessary.
Defective stapler moving motor 1. Replace stapler moving motor 1.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.
The stapler connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
The stapler is blocked with a staple. Remove the stapler cartridge, and check the cartridge and the stapling section of the stapler.
The stapler is broken. Replace the stapler and check for correct operation.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 300ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie