Code: C2000
Description: Main motor problem
Stable OFF is detected for 1 s continuously after main motor stability.
Stable OFF is detected for 1 s continuously after main motor stability.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective main motor.
Defective engine PWB.
Defective drive transmission system.
Defective main motor.
Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC10 on the engine PWB and the connector on the main motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main motor. Replace the main motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main motor. Replace the main motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.