Code: C3100
Description: Scanner carriage problem
The home position is not correct when the power is turned on or at the start of copying using the table.
The home position is not correct when the power is turned on or at the start of copying using the table.
Causes: Poor contact in the connector terminals.
Defective home position switch.
Defective scanner motor.
The mirror frame, exposure lamp, or scanner wire is defective.
Defective PWB.
Defective home position switch.
Defective scanner motor.
The mirror frame, exposure lamp, or scanner wire is defective.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the scanner PWB and the connector of the home position switch, and the connection of connector YC3 on the scanner PWB and the connector on the scanner motor and the continuity across the connector terminals. Repair or replace if necessary.
Defective home position switch. Replace the scanner home position switch.
Defective scanner motor. Replace the scanner motor.
The mirror frame, exposure lamp, or scanner wire is defective. Check if the mirror flames and exposure lamp are on the rail. And check the scanner wire winds correctly.
Defective PWB. Replace the scanner PWB or main PWB and check for correct operation.
Defective home position switch. Replace the scanner home position switch.
Defective scanner motor. Replace the scanner motor.
The mirror frame, exposure lamp, or scanner wire is defective. Check if the mirror flames and exposure lamp are on the rail. And check the scanner wire winds correctly.
Defective PWB. Replace the scanner PWB or main PWB and check for correct operation.