Code: C6420
Description: Fuser unit fuse cut problem
The fuse cannot be cut, When replacing the fuser unit, the fuse cannot be cut in 3 s after the fuse cut signal is turned on.
The fuse cannot be cut, When replacing the fuser unit, the fuse cannot be cut in 3 s after the fuse cut signal is turned on.
Causes: Poor contact in the connector terminals.
Fuser unit connector inserted incorrectly.
Fuser unit connector inserted incorrectly.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC1 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary.
Fuser unit connector inserted incorrectly. Reinsert the fuser unit connector if necessary.
Fuser unit connector inserted incorrectly. Reinsert the fuser unit connector if necessary.