Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8040 — Kyocera TASKalfa 300i

Code: C8040

Description: Belt problem (optional document finisher)
The belt sensor does not turn on/off within specified time of the belt solenoid turning on.
Causes: The belt sensor, belt solenoid connector makes poor contact.
Defective belt sensor.
Defective belt solenoid.
Defective finisher main PWB.
Remedy: The belt sensor, belt solenoid connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective belt sensor. Replace the belt sensor.
Defective belt solenoid. Replace the belt solenoid.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

← Xem tất cả mã lỗi Kyocera TASKalfa 300i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie