Code: C8140
Description: Tray elevation motor problem (optional document finisher)
The tray low limit sensor or paper surface sensor 1/2 cannot be detected to be on within 10 s since the tray elevation motor is activated.
The tray low limit sensor or paper surface sensor 1/2 cannot be detected to be on within 10 s since the tray elevation motor is activated.
Causes: The tray elevation motor connector makes poor contact.
The tray elevation motor malfunctions.
The tray lower limit sensor, paper surface sensor 1/2 connector makes poor contact.
Defective tray lower limit sensor, paper surface sensor 1/2.
Defective finisher main PWB.
The tray elevation motor malfunctions.
The tray lower limit sensor, paper surface sensor 1/2 connector makes poor contact.
Defective tray lower limit sensor, paper surface sensor 1/2.
Defective finisher main PWB.
Remedy: The tray elevation motor connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
The tray elevation motor malfunctions. Replace the tray elevation motor.
The tray lower limit sensor, paper surface sensor 1/2 connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective tray lower limit sensor, paper surface sensor 1/2. Replace the sensor.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.
The tray elevation motor malfunctions. Replace the tray elevation motor.
The tray lower limit sensor, paper surface sensor 1/2 connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective tray lower limit sensor, paper surface sensor 1/2. Replace the sensor.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.