Code: 0350
Description: Panel PWB communication error (electronic volume I2C communication error
NACK is received during I2C communication - retried 5 times - rebooting command sent - retried 5 times If NACK is still received.
NACK is received during I2C communication - retried 5 times - rebooting command sent - retried 5 times If NACK is still received.
Causes: Operation PWB. Main PWB
Remedy: Operation PWB 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Operation panel PWB 1 (YC10) and Main PWB (YC12) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the operation panel PWB 1.
Main PWB Replace the main PWB.
Main PWB Replace the main PWB.