Code: 6030
Description: Broken fuser thermistor 2 wire
A/D value of the fuser thermistor 2 exceeds 251 bit continuously for 5.6 s during warming up.
A/D value of the fuser thermistor 2 exceeds 251 bit continuously for 5.6 s during warming up.
Causes: Fuser unit. Fuser thermistor 2. Engine PWB.
Remedy: Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser thermistor 2 and Fuser PWB (YC2) Fuse PWB and Engine PWB (YC22) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Fuser thermistor 2 Replace the Fuser unit.
Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.
Fuser thermistor 2 Replace the Fuser unit.
Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.