Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 3100 — Kyocera TASKalfa 3011i

Code: 3100

Description: Scanner carriage error ON/OFF of the HP sensor doesn't change after a prescribed pulse passes from power supply ON.
Causes: The scanner mirror frame is being locked after setup. Scanner motor. Home position sensor. Engine PWB. Main PWB
Remedy: The scanner mirror frame is being locked after setup. Check whether the scanner mirror frame has been unlocked and unlock if necessary.
Scanner motor 1. To check the scanner motor, execute U073. 2. Move the scanner by the hand to check whether it is unusually difficult to move. 3. Check that the optical wire rope is not disengaged and engage the wire. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Scanner motor and Engine PWB (YC34) Engine PWB (YC37) and Main PWB (YC65) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the scanner motor.
Home position sensor 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Home position sensor and Engine PWB (YC34) 3. Replace the home position sensor.
Engine PWB Replace the Engine PWB and execute U411.
Main PWB Replace the main PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 3011i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie