Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 3210 — Kyocera TASKalfa 3011i

Code: 3210

Description: CIS lamp error When input value at the time of CIS illumination does not exceed the threshold value between 5 s.
Causes: CIS. DPSHD PWB. DP relay PWB
Remedy: CIS 1. Execute U906 Separating Operation Release. 2. Execute CIS of U061 lamp check. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CIS and DPSHD PWB (YC2) DPSHD PWB (YC3) and DP relay PWB (YC2) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the CIS and execute U091 and U411.
DPSHD PWB Replace the DPSHD PWB.
DP relay PWB Replace the DP relay PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 3011i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie