Code: 3300
Description: Optical system (AGC) error When the value of a gain becomes more than FF or 89 or less at least one at the AGC processing instruction execution time for CCD lamps.
Causes: LED lamp PWB. CCD PWB. Engine PWB. Main PWB
Remedy: LED lamp PWB 1. To check the lamp, execute U061 CCD. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. LED lamp PWB and CCD PWB (YC2) CCD PWB (YC1) and Engine PWB (YC29) Engine PWB (YC3) and Main PWB (YC64) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. If the LED lamp won’t light, replace the LED PWB and execut U411.
CCD PWB Replace the ISU and execute U411.
Engine PWB Replace the Engine PWB and execute U411.
Main PWB Replace the main PWB.
CCD PWB Replace the ISU and execute U411.
Engine PWB Replace the Engine PWB and execute U411.
Main PWB Replace the main PWB.