Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6230 — Kyocera TASKalfa 3011i

Code: 6230

Description: Broken fuser edge thermistor wire A/D value of the fuser thermistor 1 exceeds 252 bit (10 °C) continuously for 4 s during warming up.
Causes: Fuser unit. Fuser thermistor 1. Engine PWB
Remedy: Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser thermistor 1 and Engine PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Fuser thermistor 1 Replace the Fuser unit.
Engine PWB Replace the engine PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 3011i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie