Code: 6250
Description: Abnormally low fuser edge thermistor temperature When the detection temperature of the fixing thermistor 1 is falling target temperature by 100 °C or more for 1 second after secondary stable temperature attainment.
Causes: Fuser unit. Fuser thermostat. Fuser heater. Engine PWB
Remedy: Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser thermistor 1 and Engine PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. If the I/F connector pins of the fuser unit and the main unit are deformed owing to foreign matters, such as paper dusts, replace the connectors or the units including the connectors.
Fuser thermostat Fuser heater. Replace the Fuser unit.
Engine PWB Replace the engine PWB.
Fuser thermostat Fuser heater. Replace the Fuser unit.
Engine PWB Replace the engine PWB.