Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6400 — Kyocera TASKalfa 3011i

Code: 6400

Description: Zero-cross signal error While fuser heater ON/OFF control is performed, the zerocross signal is not input within 3 s.
Causes: Fuser unit
Remedy: 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB (YC7) and engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser heater PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 3011i

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie