Code: 8120
Description: DF shift motor 2 error (3000-sheet finisher) DF shift sensor 2 won’t turn on when it has travelled 160 mm after DF shift motor 2 is driven.
Causes: DF shift motor 2 rear. DF shift sensor 2 rear. DF main PWB
Remedy: DF shift motor 2 rear 1. Execute U240 Motor - Sort Test to check the finisher operation. 2. Manipulate the rear shift guide back and forth to check it is smoothly operable. 3. Check that the drive from the motor reaches the rear shift guide. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF shift motor 2 rear and DF main PWB (YC14) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the DF shift motor 2 rear.
DF shift sensor 2 rear 1. Execute U241 Finisher - Shift Tail HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF shift sensor 2 rear and DF main PWB (YC23) 4. Replace the DF shift set sensor2 rear.
DF main PWB Replace the DF main PWB.
DF shift sensor 2 rear 1. Execute U241 Finisher - Shift Tail HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF shift sensor 2 rear and DF main PWB (YC23) 4. Replace the DF shift set sensor2 rear.
DF main PWB Replace the DF main PWB.