Description: Polygon motor M synchronization error After polygon motor M is driven, the ready signal does not turn to L within 30 s.
Causes: Defective connector cable or poor contact in the connector. Defective polygon motor M. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Polygon motor M and LSU relay PWB (YC7) LSU relay PWB (YC3) and engine PWB (YC12) Defective polygon motor M. Replace the laser scanner unit. Defective engine PWB. Replace the engine PWB and check for correct operation.