Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 3310 — Kyocera TASKalfa 306ci

Code: 3310

Description: CIS AGC error In case a normal input could not be obtained from the CIS at AGC. (35/40 ppm model only)
Remedy: CIS 1. Execute the U906 resetting the partial operation. 2. Execute [CIS] in the U061 lamp lighting check. 3. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. DPCIS - DPSHD PWB (YC2) DPSHD PWB (YC3) - DPIF PWB (YC2) 4. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. 5. Replace DPCIS and execute U091 and U411.
DPSHD PWB Replace the DPSHD PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 306ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie