Description: Polygon motor startup error After the polygon motor starts, the motor stable signal is not turned ON after 30 s.
Remedy: Polygon motor 1. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Polygon motor - Engine PWB(YC5): 30 ppm model - Engine PWB(YC10): 35/40 ppm models 2. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. 3. Replace the LSU. Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB.