Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 8510 — Kyocera TASKalfa 306ci

Code: 8510

Description: MB drive motor error 1 In case unable to detect the MB home position sensor is turned ON when passing 5 s during the initial operation.
Remedy: MB conveying motor 1. Correct the mechanism if the conveying roller gets caught when rotating it manually. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. MB drive motor - MB main PWB(YC4) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. 4. Replace the MB drive motor.
MB home position sensor 1. Execute [Mail Box] > [Motor HP] in U241 Checking the operation of the finisher switch. 2. Check if there is a failure in the position of the sensor or mounting plate. 3. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. MB home position sensor - MB main PWB(YC3) 4. Replace the MB home position sensor.
MB main PWB Replace the MB main PWB.

← Xem tất cả mã lỗi Kyocera TASKalfa 306ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie