Code: 6400
Description: Zero-cross signal error
While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s.
While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s.
Causes: Defective connector cable or poor contact in the connector.
Defective fuser heater PWB.
Defective fuser heater PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Fuser heater PWB (YC29) and feed PWB 1 (YC27)
Defective fuser heater PWB. Replace the fuser heater PWB and check for correct operation.
Defective fuser heater PWB. Replace the fuser heater PWB and check for correct operation.