Code: 7001
Description: Toner motor error
A state in which the lock signal is detected for 20 times has been detected 3 times during the toner motor is activated.
A state in which the lock signal is detected for 20 times has been detected 3 times during the toner motor is activated.
Causes: Defective connector cable or poor contact in the connector.
Defective toner motor.
Defective engine PWB.
Defective toner motor.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Toner motor and engine PWB (YC27)
Defective toner motor. Replace the toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective toner motor. Replace the toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.