Code: 2212
Description: Drum motor KM startup error After the motor starting, the stable signal is not turned ON within 3 s.
Causes:
Remedy: Drum unit K or Drum unit M Check that the drum can be rotated by hand, and if it is locked, replace the drum unit K or drum unit M. Defective connector cable or poor contact in the connector 1. Reinsert the connector. 2. Check continuity within the connector wire. If none, replace the wire. Drum motor KM and Engine relay PWB (YC13) Engine relay PWB (YC1) and Main/Engine PWB (YC4) Drive transmission system for the drum motor KM 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check broken couplings and gears, and replace if any. Drum motor KM Replace the drum motor KM. Engine relay PWB Replace the engine relay PWB. Main/Engine PWB Replace the Main/Engine PWB.