Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi F12X — Kyocera TASKalfa 350ci

Code: F12X

Description: An error is detected at scan control section
Causes: [Main/Engine PWB - CCD PWB] Main/Engine PWB: YC2014 CCD PWB: YC1 [Main/Engine PWB- DP relay PWB ] Main/Engine PWB: YC22, YC23 DP relay PWB: YC3, YC1
Remedy: 1. Check the wire or connector between Scan/DP PWB (CCD PWB or DP relay PWB) and Main/engine PWB and correct it if necessary. (Reconnect the connector or replace the wire) Check the operation after that. 2. Execute U021 (Init memory) and check function. 3.Replace the CCD PWB or DP relay PWB and check function. 4. Replace the main/engine PWB and check function. 5. Retrieve the USBLOG and contact the Service Administrative Division.

← Xem tất cả mã lỗi Kyocera TASKalfa 350ci

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie